SATA HDD SSD Expansion Board X825

Category:

Overview
The X825 expansion board provides a complete storage solution for newest Raspberry Pi 4 Model B, it supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 Board;
It is updated from Raspberry Pi 3B+/3B X820 V3.0 2.5 inch SATA SSD expansion board. (Please refer to X820 if you want use the 2.5 inch SATA SSD on raspberry pi 3b+/3b/2b)

Key Features

  • Supports upto 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) (Theoretically it can work with 6TB or 8TB as well. But actually we do not test the X825 board with 6tb or 8tb HDD, you can have a try.)
  • Ideal storage solution for Raspberry Pi 4 Model B
  • On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)
  • Powers the Raspberry Pi via Pi’s 40-pin header
  • LED red indicator indicates powered status and blue indicator indicates drive status
  • USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
  • Quick file transfer with high-speed USB 3.1 connectivity from a PC or a Mac
  • Powers the Raspberry Pi – no additional power supply for RPi 4

Power Supply

  • Power supply: AC 100 – 240V input 50 / 60Hz, 5V DC 4A output
  • DC Power Plug Size : 5.5*2.5mm
  • Important Note: Please use high quality DC 5V 4A power supply, the best choice is to buy the DC 5V 4A power supply that Geekworm provided. If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD.

Packing List:

  • 1 x X825 V1.5 Expansion Board
  • 1 x USB 3.1 connector
  • 1 x 2 Pin Power Connection Wire(Cable: 12cm/4.72inch)
  • 1 x Mounting screws pack
Weight 300 g
Dimensions 15 × 15 × 15 cm

Reviews

There are no reviews yet.

Be the first to review “SATA HDD SSD Expansion Board X825”

Your email address will not be published. Required fields are marked *